Player's Edge Plus Set Chip [Model SET001]

To enable the bill validator on a PE+:
- Turn the machine off.
- Remove the MPU board.
- Remove the current chip in the Program socket.
- Install the SET chip in the Program socket (make sure to install the chip with the notch in the same direction as the chip you removed).
- Put the MPU board back in the machine and turn the power on.

Follow the directions on the screen -- use the Jackpot Reset key to set the correct denomination ($0.05, $0.25, etc.), and use the Deal/Draw button to toggle the Disabled/Enabled option to Enabled.

Make sure to press the white self test button to save the settings, and wait until you see Options Saved on the screen. Once you've done that:
- Turn the machine off.
- Remove the MPU board.
- Remove the SET chip from the Program socket and put your game program back in its place.
- Install the MPU board again.
- Turn the machine on -- your bill validator should now work.